Armadillo SBC + 4.3in Touch Display
Технически документи
Спецификации
Brand
4D SystemsCore Processor
ARM1176JZF-S
Installed Memory
512 MB
Maximum Supported Memory Capacity
4GB
Supported I/O Interfaces
USB
Supported Network Interfaces
Ethernet, Wireless
Expansion Slots
MicroSD
Supported Hard Drive Interface
USB
Dimensions
120.7 x 16.5 x 69.6mm
Height
69.6mm
Length
16.5mm
Width
120.7mm
Minimum Operating Temperature
-20 °C
Maximum Operating Temperature
+70 °C
Страна на произход
Philippines
Детайли за продукта
Armadillo-43T Linux-based Embedded Computer Display Module
The Armadillo from 4D Systems is a display module that combines a Linux-based prototyping platform and colour LCD into a single solution. The LCD provides the primary display, removing the need for an external monitor to configure the Armadillo.
The Armadillo is designed to utilise Armadillian, an Operating System based on Raspian that allows the Armadillo to run most applications written for Raspberry Pi. Like the first-generation Raspberry Pi boards, the Armadillo employs the Broadcom BCM2835 SoC with 512 MB RAM.
The colour LCD touchscreen provides the module with a 24-bit 4.3” 480 x 272 resolution display with 4-wire resistive touch.
Features
Broadcom BCM2835 ARM11-core SoC with VideoCore IV GPU
512 MB SDRAM
4.3” 480 x 272p resolution 24-bit colour TFT screen with integrated 4-wire resistive touch panel
PWM controlled display backlight
PWM mono audio output
2 x 10 way GPIO headers providing UART, SPI and I2C channels
1 x 10 way JTAG header
microSD Flash memory card slot for bootloading the OS and program storage
Flexible power options – USB, 5 V dc barrel jack or via GPIO 5 V pin
User pushbutton – connected to a GPIO
Reset pushbutton
Operating temperature range: -20 to +70°C
4 x corner plates with 2.6 mm diameter mounting holes
Dimensions: 120.7 x 69.6 x 16.5 mm (including corner plates)
Item Contents
Aramdillo-43T embedded computer
Quick start user guide
4D Systems LCD Touchscreens
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
4D SystemsCore Processor
ARM1176JZF-S
Installed Memory
512 MB
Maximum Supported Memory Capacity
4GB
Supported I/O Interfaces
USB
Supported Network Interfaces
Ethernet, Wireless
Expansion Slots
MicroSD
Supported Hard Drive Interface
USB
Dimensions
120.7 x 16.5 x 69.6mm
Height
69.6mm
Length
16.5mm
Width
120.7mm
Minimum Operating Temperature
-20 °C
Maximum Operating Temperature
+70 °C
Страна на произход
Philippines
Детайли за продукта
Armadillo-43T Linux-based Embedded Computer Display Module
The Armadillo from 4D Systems is a display module that combines a Linux-based prototyping platform and colour LCD into a single solution. The LCD provides the primary display, removing the need for an external monitor to configure the Armadillo.
The Armadillo is designed to utilise Armadillian, an Operating System based on Raspian that allows the Armadillo to run most applications written for Raspberry Pi. Like the first-generation Raspberry Pi boards, the Armadillo employs the Broadcom BCM2835 SoC with 512 MB RAM.
The colour LCD touchscreen provides the module with a 24-bit 4.3” 480 x 272 resolution display with 4-wire resistive touch.
Features
Broadcom BCM2835 ARM11-core SoC with VideoCore IV GPU
512 MB SDRAM
4.3” 480 x 272p resolution 24-bit colour TFT screen with integrated 4-wire resistive touch panel
PWM controlled display backlight
PWM mono audio output
2 x 10 way GPIO headers providing UART, SPI and I2C channels
1 x 10 way JTAG header
microSD Flash memory card slot for bootloading the OS and program storage
Flexible power options – USB, 5 V dc barrel jack or via GPIO 5 V pin
User pushbutton – connected to a GPIO
Reset pushbutton
Operating temperature range: -20 to +70°C
4 x corner plates with 2.6 mm diameter mounting holes
Dimensions: 120.7 x 69.6 x 16.5 mm (including corner plates)
Item Contents
Aramdillo-43T embedded computer
Quick start user guide