TE Connectivity ADK Series Zinc Angled D Sub Backshell, 37 Way, Strain Relief
Технически документи
Спецификации
Body Orientation
Angled
D-Sub Shell Size
C
Strain Relief
Yes
Number Of Contacts
37
Colour
Silver
Housing Material
Zinc
Brand
TE ConnectivitySeries
ADK
Детайли за продукта
STEVAL-ISA076V1 Li-Ion/Li-Po Battery Charger Demonstration Board
The demonstration board is a battery charger with integrated power switch, based on the L6924D, a single cell Li-Ion/Li-Polymer battery charger.
Operating input voltage up to 12 Volts
Fully integrated solution with power MOSFET, reverse blocking diode, sense resistor, and thermal control
Both linear and quasi-pulse operation
Programmable charge current both in fast charge (up to 1A) and in pre-charge mode
Selectable 4.1V and 4.2V output voltage (±1% accuracy)
Programmable termination current
Programmable pre-charge mode voltage threshold
Programmable charge timer
Multifunction pin for flexible charge process termination
Status outputs to drive LEDs or host processor interface
Battery absence detection
Closed loop thermal control
NTC or PTC thermistor interface for battery temperature monitoring and protection
Battery Charging & Monitoring, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 10,097
Each (In a Bag of 100) (ex VAT)
100
€ 10,097
Each (In a Bag of 100) (ex VAT)
100
Купете в насипно състояние
| количество | Единична цена | Per Чувал |
|---|---|---|
| 100 - 100 | € 10,097 | € 1 009,68 |
| 200 - 200 | € 9,592 | € 959,22 |
| 300 - 400 | € 9,108 | € 910,75 |
| 500+ | € 8,653 | € 865,34 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Технически документи
Спецификации
Body Orientation
Angled
D-Sub Shell Size
C
Strain Relief
Yes
Number Of Contacts
37
Colour
Silver
Housing Material
Zinc
Brand
TE ConnectivitySeries
ADK
Детайли за продукта
STEVAL-ISA076V1 Li-Ion/Li-Po Battery Charger Demonstration Board
The demonstration board is a battery charger with integrated power switch, based on the L6924D, a single cell Li-Ion/Li-Polymer battery charger.
Operating input voltage up to 12 Volts
Fully integrated solution with power MOSFET, reverse blocking diode, sense resistor, and thermal control
Both linear and quasi-pulse operation
Programmable charge current both in fast charge (up to 1A) and in pre-charge mode
Selectable 4.1V and 4.2V output voltage (±1% accuracy)
Programmable termination current
Programmable pre-charge mode voltage threshold
Programmable charge timer
Multifunction pin for flexible charge process termination
Status outputs to drive LEDs or host processor interface
Battery absence detection
Closed loop thermal control
NTC or PTC thermistor interface for battery temperature monitoring and protection
Battery Charging & Monitoring, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products