Технически документи
Спецификации
Детайли за продукта
Electric Hot Plate with FREE Bearing fitting tool kit TMFT 36
The SKF Electric Hot Plate 729659 C is designed to heat bearings and other machine components prior to installation. The thermostatically-controlled hot plate may be heated to a maximum temperature of 200°C and is suitable for bearings with a bore up to 100mm (4 inch) diameter. To retain heat and prevent dirt from contaminating a bearing, the SKF Electric Hot Plate also incorporates a removable lid.
FREE: Bearing fitting tool kit TMFT 36
The fitting tool kitis designed for quick, precise and safe mounting of bearings with bore diameters from 10 to 55mm (0.39 - 2.2 in) with outer diameter ranging from 26 to 120mm (1.0 - 4.7 in). It can also be used to mount bushings, seal rings, belt pulleys etc. The fitting tool kit TMFT 36, contains 36 impact rings, 3 impact sleeves and a dead-blow hammer packed in a carrying case. The impact rings are made of high-impact modified polyamide. The impact sleeves are made of glass fibrereinforced, high-impact modified polyamide, which is super-tough, strong and lightweight. The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The welded-on steel handle, with comfortable rubbergrip for good handling, absorbs shock and vibration
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Детайли за продукта
Electric Hot Plate with FREE Bearing fitting tool kit TMFT 36
The SKF Electric Hot Plate 729659 C is designed to heat bearings and other machine components prior to installation. The thermostatically-controlled hot plate may be heated to a maximum temperature of 200°C and is suitable for bearings with a bore up to 100mm (4 inch) diameter. To retain heat and prevent dirt from contaminating a bearing, the SKF Electric Hot Plate also incorporates a removable lid.
FREE: Bearing fitting tool kit TMFT 36
The fitting tool kitis designed for quick, precise and safe mounting of bearings with bore diameters from 10 to 55mm (0.39 - 2.2 in) with outer diameter ranging from 26 to 120mm (1.0 - 4.7 in). It can also be used to mount bushings, seal rings, belt pulleys etc. The fitting tool kit TMFT 36, contains 36 impact rings, 3 impact sleeves and a dead-blow hammer packed in a carrying case. The impact rings are made of high-impact modified polyamide. The impact sleeves are made of glass fibrereinforced, high-impact modified polyamide, which is super-tough, strong and lightweight. The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The welded-on steel handle, with comfortable rubbergrip for good handling, absorbs shock and vibration