Технически документи
Спецификации
Brand
SiemensCoil Voltage
24 V dc
Contact Voltage Rating
600 V ac
Contact Current Rating
10 A
Range
SIRIUS
Series
3TK28
Normal State Configuration
3NO
Terminal Type
Screw
Length
132mm
Width
90mm
Depth
108mm
Pole and Throw Configuration
3P
Страна на произход
Germany
Детайли за продукта
SIRIUS 3TK28 5 Safety Relays with contactor relay enabling circuits
The SIRIUS 3TK28 5 safety relay combines solid-state safety functionality and two redundant contacting auxiliary contactors. These safety relays/contactors are supplied ready assembled, wired, tested and certified as a single unit. Available with spring-loaded or screw terminals.
Enabling circuits, floating
AC-15/DC-13 switching capacity
Protective separation
Autostart / monitored start
Screw and snap-on installation mounting possible
Long mechanical and electrical endurance
Certified as a complete unit
Fault minimization and cost reduction through factory wiring
Low installation costs
Approvals
TUV, UL, CSA.
Standards
EN 60204-1, EN ISO 12100, EN 954-1, IEC 61508.
Safety Contactor
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
SiemensCoil Voltage
24 V dc
Contact Voltage Rating
600 V ac
Contact Current Rating
10 A
Range
SIRIUS
Series
3TK28
Normal State Configuration
3NO
Terminal Type
Screw
Length
132mm
Width
90mm
Depth
108mm
Pole and Throw Configuration
3P
Страна на произход
Germany
Детайли за продукта
SIRIUS 3TK28 5 Safety Relays with contactor relay enabling circuits
The SIRIUS 3TK28 5 safety relay combines solid-state safety functionality and two redundant contacting auxiliary contactors. These safety relays/contactors are supplied ready assembled, wired, tested and certified as a single unit. Available with spring-loaded or screw terminals.
Enabling circuits, floating
AC-15/DC-13 switching capacity
Protective separation
Autostart / monitored start
Screw and snap-on installation mounting possible
Long mechanical and electrical endurance
Certified as a complete unit
Fault minimization and cost reduction through factory wiring
Low installation costs
Approvals
TUV, UL, CSA.
Standards
EN 60204-1, EN ISO 12100, EN 954-1, IEC 61508.