RS PRO Signal Conditioner, Current, Voltage Input, Current Output, 115V ac Supply
Технически документи
Спецификации
Brand
RS ProModule Type
Trip Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 mA, -250 → +250V dc
Output Range
0 → 20mA
Supply Voltage
115V ac
Operating Temperature Range
0 → +45°C
Series
BD
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+45°C
Termination
Screw
Страна на произход
United Kingdom
Детайли за продукта
BD120 Dual Level Trip Amplifier
RS Pro dual level trip amplifiers operate from a single process input, with a dual trip action. This output can be arranged so that the alarm condition is triggered either above or below the defined set point. The relay can also be configured for a Fail-Safe (energised in the stable state to de-energise in the alarm state) or Non-Fail Safe (de-energised in the stable state to energise in the alarm state) operation.
2 x SPCO relay (max. 60W load) output
High trip/low trip (user-configurable); fail-safe design (HLFS)
Adjustable set points
Bi-colour LED trip status indication: Green LED indicates stable state; red LED indicates alarm state
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 178,87
Всеки (ex VAT)
1
€ 178,87
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
RS ProModule Type
Trip Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 mA, -250 → +250V dc
Output Range
0 → 20mA
Supply Voltage
115V ac
Operating Temperature Range
0 → +45°C
Series
BD
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+45°C
Termination
Screw
Страна на произход
United Kingdom
Детайли за продукта
BD120 Dual Level Trip Amplifier
RS Pro dual level trip amplifiers operate from a single process input, with a dual trip action. This output can be arranged so that the alarm condition is triggered either above or below the defined set point. The relay can also be configured for a Fail-Safe (energised in the stable state to de-energise in the alarm state) or Non-Fail Safe (de-energised in the stable state to energise in the alarm state) operation.
2 x SPCO relay (max. 60W load) output
High trip/low trip (user-configurable); fail-safe design (HLFS)
Adjustable set points
Bi-colour LED trip status indication: Green LED indicates stable state; red LED indicates alarm state