RS PRO Heating Element, 3 kW, 240 V
Технически документи
Спецификации
Brand
RS ProElement Type
Water Heater
Power Rating
3 kW
Supply Voltage
240 V
Страна на произход
United Kingdom
Детайли за продукта
RS PRO Domestic Water Heater Elements
RS PRO Aqualoy 2 1/4 inch BSP boss dual cut-out domestic immersion heater. Lime scale build up can be an issue and can affect the efficiency of the heater, this heating element offers higher levels of scale build-up resistance than copper elements and is best suited for more aggressive water areas. The heater has dual safety protection features, including a rod thermostat and a separate secondary manual reset safety cut-out.
Options include:
467-6819 - 3 kW Water Heater With Aqualoy Heating Element, 240 V, 11 inches
467-6825 - 3 kW Water Heater With Aqualoy Heating Element, 240 V, 27 inches
Features and Benefits
• Sheath: Aqualoy so suited to more aggressive water areas
• Supplied complete with rod thermostat
• Secondary manual reset
• Length: 11 inches (467-6819) or 27 inches (467-6825)
Typical Applications
Hot water is an essential part of everyday life and to have a precise temperature control and delivery on demand can be crucial. Immersion heaters are electric heating elements that are found in water cylinders to heat water. These elements perform like a kettle to heat the surrounding water in the cylinder. One key advantage of an immersion heater element within your heating system is that if the boiler fails, you should still be able to get hot water. The element usually has its own power supply which means that it can be turned on and off when needed so that water is not constantly being heated unnecessarily.
• Hot water heating
FAQs
How do water heater elements work?
A water heating element is a pair of upper and lower heating elements that fit into a water heater of some sort. An electric current is passed through the elements which then heats the cold water.
What causes water heater elements to burn out?
Below are some causes:
- Power surge - a sudden voltage increase to the element caused by a power surge can be enough to burn out an element.
- Wires - a bad connection can cause an element to stop working.
- Thermostat tripping out- these have a high limit switch that shuts off power to the elements when temperatures exceed normal.
- Minerals - sediment collects at the bottom of the water heater tank, encasing the lower element. Forced to work harder, the element eventually fails.
- Air pockets - these allow the upper element to burn while not immersed in water, resulting in failure.
Approvals
WRAS
BEAB
CE
Standards
EN 60335-2-73
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
RS ProElement Type
Water Heater
Power Rating
3 kW
Supply Voltage
240 V
Страна на произход
United Kingdom
Детайли за продукта
RS PRO Domestic Water Heater Elements
RS PRO Aqualoy 2 1/4 inch BSP boss dual cut-out domestic immersion heater. Lime scale build up can be an issue and can affect the efficiency of the heater, this heating element offers higher levels of scale build-up resistance than copper elements and is best suited for more aggressive water areas. The heater has dual safety protection features, including a rod thermostat and a separate secondary manual reset safety cut-out.
Options include:
467-6819 - 3 kW Water Heater With Aqualoy Heating Element, 240 V, 11 inches
467-6825 - 3 kW Water Heater With Aqualoy Heating Element, 240 V, 27 inches
Features and Benefits
• Sheath: Aqualoy so suited to more aggressive water areas
• Supplied complete with rod thermostat
• Secondary manual reset
• Length: 11 inches (467-6819) or 27 inches (467-6825)
Typical Applications
Hot water is an essential part of everyday life and to have a precise temperature control and delivery on demand can be crucial. Immersion heaters are electric heating elements that are found in water cylinders to heat water. These elements perform like a kettle to heat the surrounding water in the cylinder. One key advantage of an immersion heater element within your heating system is that if the boiler fails, you should still be able to get hot water. The element usually has its own power supply which means that it can be turned on and off when needed so that water is not constantly being heated unnecessarily.
• Hot water heating
FAQs
How do water heater elements work?
A water heating element is a pair of upper and lower heating elements that fit into a water heater of some sort. An electric current is passed through the elements which then heats the cold water.
What causes water heater elements to burn out?
Below are some causes:
- Power surge - a sudden voltage increase to the element caused by a power surge can be enough to burn out an element.
- Wires - a bad connection can cause an element to stop working.
- Thermostat tripping out- these have a high limit switch that shuts off power to the elements when temperatures exceed normal.
- Minerals - sediment collects at the bottom of the water heater tank, encasing the lower element. Forced to work harder, the element eventually fails.
- Air pockets - these allow the upper element to burn while not immersed in water, resulting in failure.
Approvals
WRAS
BEAB
CE
Standards
EN 60335-2-73