X9C103PZ, Digital Potentiometer 10kΩ 100-Position Linear Serial-3 Wire 8 Pin, PDIP
![brand-logo](https://media.rs-online.com/brand/M2532-01.jpg)
Технически документи
Спецификации
Taper Type
Linear
Number of Pots per Package
1
Memory Type
Non-Volatile
Resistance Value
10kΩ
Number of Positions
100
Control Interface
Serial-3 Wire
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Through Hole
Height
3.3mm
Width
6.35mm
Length
9.56mm
Typical Single Supply Voltage
5 V
Package Type
PDIP
Brand
Renesas ElectronicsDimensions
9.56 x 6.35 x 3.3mm
Страна на произход
Thailand
Детайли за продукта
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
4 Voltage channels + 3 Current channels
Triple digital display
Suitable for use on single-phase, split-phase and three-phase installations
Can be installed without cutting off the mains power supply
Map the electrical consumption on a site
Gain a real-time snapshot of consumption
Analyse electrical network quality
Record harmonics up to the 50th order with phase indication
Record results to an SD card
Real-time communication with a PC
Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
4 measurement leads (straight banana, 3 m long, black)
4 crocodile clips (black)
1 SD card (2 GB)
1 set of rings and inserts (for ends of leads and current sensors)
1 mains cable
1 USB cable (Type A, Type B)
1 Multifix mounting systems
1 operating manual (on CD)
1 bag
1 safety datasheet
PEL Transfer PC software
1 quick start-up guide
SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 6,542
Each (In a Pack of 2) (ex VAT)
Стандарт
2
€ 6,542
Each (In a Pack of 2) (ex VAT)
Стандарт
2
Купете в насипно състояние
количество | Единична цена | Per Опаковка |
---|---|---|
2 - 8 | € 6,542 | € 13,08 |
10 - 38 | € 5,586 | € 11,17 |
40 - 98 | € 5,292 | € 10,58 |
100 - 198 | € 4,811 | € 9,62 |
200+ | € 4,583 | € 9,16 |
Технически документи
Спецификации
Taper Type
Linear
Number of Pots per Package
1
Memory Type
Non-Volatile
Resistance Value
10kΩ
Number of Positions
100
Control Interface
Serial-3 Wire
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Through Hole
Height
3.3mm
Width
6.35mm
Length
9.56mm
Typical Single Supply Voltage
5 V
Package Type
PDIP
Brand
Renesas ElectronicsDimensions
9.56 x 6.35 x 3.3mm
Страна на произход
Thailand
Детайли за продукта
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
4 Voltage channels + 3 Current channels
Triple digital display
Suitable for use on single-phase, split-phase and three-phase installations
Can be installed without cutting off the mains power supply
Map the electrical consumption on a site
Gain a real-time snapshot of consumption
Analyse electrical network quality
Record harmonics up to the 50th order with phase indication
Record results to an SD card
Real-time communication with a PC
Data transfer and analysis with supplied PEL software
The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.
Supplied with
4 measurement leads (straight banana, 3 m long, black)
4 crocodile clips (black)
1 SD card (2 GB)
1 set of rings and inserts (for ends of leads and current sensors)
1 mains cable
1 USB cable (Type A, Type B)
1 Multifix mounting systems
1 operating manual (on CD)
1 bag
1 safety datasheet
PEL Transfer PC software
1 quick start-up guide
SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III