Технически документи
Спецификации
Brand
ArduinoClassification
Development Board
Technology
512 KB Flash Memory, 64 KB SRAM, Bluetooth, CAN, Ethernet, NFC Connector, On-Board EEPROM Memory, SPI, SWD Connector, TWI, UART, USB Host, WiFi
Device Core
ARM Cortex M4F
Processor Family Name
Arduino
Processor Part Number
Nordic nRF52832
Processor Type
MCU
Страна на произход
Italy
Детайли за продукта
Arduino Primo Core
The Primo Core is a tiny, coin sized Arduino, designed for IoT and wearable applications. Not only is it physically small, it uses a tiny amount of power too so perfect for battery operation. It uses a Nordic nrf52832 chip with Bluetooth smart (BLE 4.0) and NFC-A tag functions, together with integrated motion and environmental sensors.
Primo Core Main Features
10 digital input/output pins
10 PWM (all digital pins)
Accelerometer and gyroscope sensor
Temperature and humidity sensor
RGB LED
Programming SWD connector
Coin cell battery connector (CR2032 battery included – RS 866-0672)
BLE interface
NFC connector (external NFC tag included)
Microcontroller reset buttons
On/Off switch for powering the board
Input Voltage: 5 V
PCB Size: 32 x 32 mm
Arduino Microcontroller
Microcontroller: Nordic nRF52832
Architecture: ARM Cortex-M4F
Operating Voltage: 3.3 V
Flash memory: 512 KB
SRAM: 64 KB
Clock Speed: 64 MHz
Analogue I/O Pins: 8
Bluetooth Smart (BLE 4.0): TX power up to +4 dBm -96 dBm sensitivity in BLE mode
Required Software
Arduino IDE 1.8.x software, download the Arduino NRF52 Boards platform from the Board Manager and follow the Getting Started guide.
http://www.arduino.org/learning/getting-started/getting-started-with-arduino-primo-core
http://www.arduino.org/learning/tutorials/boards-tutorials/content/arduino-primo-core-tutorials
Arduino Nordic Development Boards
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
ArduinoClassification
Development Board
Technology
512 KB Flash Memory, 64 KB SRAM, Bluetooth, CAN, Ethernet, NFC Connector, On-Board EEPROM Memory, SPI, SWD Connector, TWI, UART, USB Host, WiFi
Device Core
ARM Cortex M4F
Processor Family Name
Arduino
Processor Part Number
Nordic nRF52832
Processor Type
MCU
Страна на произход
Italy
Детайли за продукта
Arduino Primo Core
The Primo Core is a tiny, coin sized Arduino, designed for IoT and wearable applications. Not only is it physically small, it uses a tiny amount of power too so perfect for battery operation. It uses a Nordic nrf52832 chip with Bluetooth smart (BLE 4.0) and NFC-A tag functions, together with integrated motion and environmental sensors.
Primo Core Main Features
10 digital input/output pins
10 PWM (all digital pins)
Accelerometer and gyroscope sensor
Temperature and humidity sensor
RGB LED
Programming SWD connector
Coin cell battery connector (CR2032 battery included – RS 866-0672)
BLE interface
NFC connector (external NFC tag included)
Microcontroller reset buttons
On/Off switch for powering the board
Input Voltage: 5 V
PCB Size: 32 x 32 mm
Arduino Microcontroller
Microcontroller: Nordic nRF52832
Architecture: ARM Cortex-M4F
Operating Voltage: 3.3 V
Flash memory: 512 KB
SRAM: 64 KB
Clock Speed: 64 MHz
Analogue I/O Pins: 8
Bluetooth Smart (BLE 4.0): TX power up to +4 dBm -96 dBm sensitivity in BLE mode
Required Software
Arduino IDE 1.8.x software, download the Arduino NRF52 Boards platform from the Board Manager and follow the Getting Started guide.
http://www.arduino.org/learning/getting-started/getting-started-with-arduino-primo-core
http://www.arduino.org/learning/tutorials/boards-tutorials/content/arduino-primo-core-tutorials