ABB B6 VB6 Contactor, 240 V ac Coil, 3-Pole, 20 A, 4 kW, 3NO, 690 V ac
Технически документи
Спецификации
Brand
ABBCoil Voltage
240 V ac
Number of Poles
3
Contact Voltage Rating
690 V ac
Contact Current Rating
20 A
Range
B6
Series
VB6
Power Rating
4 kW
Normal State Configuration
3NO
Number Of Auxiliary Contacts
1
Auxiliary Contact Configuration
1NC
Terminal Type
Screw
Length
57.5mm
Width
96.5mm
Depth
46.5mm
Minimum Operating Temperature
-25°C
Pole and Throw Configuration
3P
Mounting Style
Rail Mount
Maximum Operating Temperature
+55°C
Страна на произход
Germany
Детайли за продукта
VB6/VB7 - Compact Rreversing Contactors
The mechanical lock between the two contactors prevents one of the contactors from switching on, as long as the other is still switched on and vice versa.
Switching over reversing contactors too quickly poses the risk of a phase short circuit.
This is the case if the arc of the contactor switching off has not yet extinguished and the contacts of the contactor switching on are already closed.
To avoid this risk, the two contactor coils must be switched to idle for a minimum of 50 ms during the switchover process and electrically locked against each other.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 83,43
Всеки (ex VAT)
1
€ 83,43
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
ABBCoil Voltage
240 V ac
Number of Poles
3
Contact Voltage Rating
690 V ac
Contact Current Rating
20 A
Range
B6
Series
VB6
Power Rating
4 kW
Normal State Configuration
3NO
Number Of Auxiliary Contacts
1
Auxiliary Contact Configuration
1NC
Terminal Type
Screw
Length
57.5mm
Width
96.5mm
Depth
46.5mm
Minimum Operating Temperature
-25°C
Pole and Throw Configuration
3P
Mounting Style
Rail Mount
Maximum Operating Temperature
+55°C
Страна на произход
Germany
Детайли за продукта
VB6/VB7 - Compact Rreversing Contactors
The mechanical lock between the two contactors prevents one of the contactors from switching on, as long as the other is still switched on and vice versa.
Switching over reversing contactors too quickly poses the risk of a phase short circuit.
This is the case if the arc of the contactor switching off has not yet extinguished and the contacts of the contactor switching on are already closed.
To avoid this risk, the two contactor coils must be switched to idle for a minimum of 50 ms during the switchover process and electrically locked against each other.