HARTING, D-Sub Standard Series, Male Crimp D-sub Connector Contact, Gold over Nickel Pin, 24 → 20 AWG
Технически документи
Спецификации
Brand
HartingGender
Male
Contact Material
Brass
Wire Size
24 → 20 AWG
Contact Plating
Gold over Nickel
Termination Method
Crimp
Contact Type
Pin
Series
D-Sub Standard
Length
14.48mm
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
€ 106,77
€ 0,214 Each (On a Reel of 500) (ex VAT)
500
€ 106,77
€ 0,214 Each (On a Reel of 500) (ex VAT)
500
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
| количество | Единична цена | Per Ролка |
|---|---|---|
| 500 - 24500 | € 0,214 | € 106,77 |
| 25000 - 49500 | € 0,208 | € 103,84 |
| 50000 - 124500 | € 0,202 | € 100,90 |
| 125000 - 249500 | € 0,196 | € 97,97 |
| 250000+ | € 0,191 | € 95,62 |
Технически документи
Спецификации
Brand
HartingGender
Male
Contact Material
Brass
Wire Size
24 → 20 AWG
Contact Plating
Gold over Nickel
Termination Method
Crimp
Contact Type
Pin
Series
D-Sub Standard
Length
14.48mm
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807