Xylem Lowara 10 bar Solar Central Heating Pump, 2.7m Head, 1/2 in BSP
Технически документи
Спецификации
Brand
Xylem LowaraPower Supply Type
Solar
Maximum Head
2.7m
Maximum Working Pressure
10 bar
Connection
1/2 in BSP
Housing Material
Brass
Maximum Temperature
+95°C
Minimum Temperature
-10°C
Supply Voltage
8 → 24 V dc
Thread Size
1/2in
Thread Standard
BSP
Fluid Temperature Range
-10 → +95°C
Страна на произход
Germany
Детайли за продукта
Ecocirc Solar DC
The first highly efficient long life silent DC spherical motor pump with magnetically coupled impeller for direct connection to photovoltaic panels. This pump is capable of self performance optimisation using MPP (Maximum Power Point) tracking. Every three seconds the pump control processor will modify its operating point on the voltage / current curve of the PV panel at any given insolation. The point of maximum motor performance can then be found and utilised. This pump can be used wherever there is no direct connection to AC power and is ideal for circulating water through solar thermal installations.
Soft start at very low insolation (less than 1 Watt required)
Unique electronically commutated spherical motor with ultra hard wear resistant ceramic ball bearing
Permanent magnet rotor / impeller
Economical and powerful
Long life, blockage free and maintenance free
RF suppressed
Reverse polarity protected
Acceptable media: domesitc hot water, heating water, water / glycol mixtures
Circulators
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
Xylem LowaraPower Supply Type
Solar
Maximum Head
2.7m
Maximum Working Pressure
10 bar
Connection
1/2 in BSP
Housing Material
Brass
Maximum Temperature
+95°C
Minimum Temperature
-10°C
Supply Voltage
8 → 24 V dc
Thread Size
1/2in
Thread Standard
BSP
Fluid Temperature Range
-10 → +95°C
Страна на произход
Germany
Детайли за продукта
Ecocirc Solar DC
The first highly efficient long life silent DC spherical motor pump with magnetically coupled impeller for direct connection to photovoltaic panels. This pump is capable of self performance optimisation using MPP (Maximum Power Point) tracking. Every three seconds the pump control processor will modify its operating point on the voltage / current curve of the PV panel at any given insolation. The point of maximum motor performance can then be found and utilised. This pump can be used wherever there is no direct connection to AC power and is ideal for circulating water through solar thermal installations.
Soft start at very low insolation (less than 1 Watt required)
Unique electronically commutated spherical motor with ultra hard wear resistant ceramic ball bearing
Permanent magnet rotor / impeller
Economical and powerful
Long life, blockage free and maintenance free
RF suppressed
Reverse polarity protected
Acceptable media: domesitc hot water, heating water, water / glycol mixtures
Circulators