TE Connectivity Transparent Polyolefin Solder Sleeve 35.5mm Length 4 → 11.5mm Cable Diameter
Технически документи
Спецификации
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Страна на произход
Mexico
Детайли за продукта
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 3,568
Each (In a Pack of 25) (ex VAT)
25
€ 3,568
Each (In a Pack of 25) (ex VAT)
25
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 25 - 350 | € 3,568 | € 89,21 |
| 375 - 1225 | € 3,391 | € 84,77 |
| 1250+ | € 3,213 | € 80,32 |
Технически документи
Спецификации
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Страна на произход
Mexico
Детайли за продукта
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.