SKF NK 40/30 40mm I.D Needle Roller Bearing, 50mm O.D
Технически документи
Спецификации
Brand
SKFInside Diameter
40mm
Outside Diameter
50mm
Roller Bearing Type
Needle
Race Width
30mm
Bore Type
Parallel
Material
Metal
Static Load Rating
83kN
Cage Material
Reinforced Nylon 66
Number of Rows
1
Roller Material
Carbon Chromium Steel
Dynamic Load Rating
38kN
End Type
Open
Reference Speed
10000rpm
Limiting Speed
11000rpm
Maximum Speed - Grease
7000rpm
Maximum Speed - Oil
10000rpm
Fatigue Limit Load
10.8kN
Страна на произход
Germany
Детайли за продукта
SKF Machine Needle Roller Bearings Series NK
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size.
Needle roller without inner ring
Needle Roller Bearings with flanges in the outer ring and diameters up to and including 17mm are produced with inserted closure rings, are without lubrication and do not have an annular groove
The larger bearings have integral flanges, an annular groove and, depending on size, one or more lubrication holes in the outer ring
Can be used where the shaft is hardened and ground, the bearing runs on the shaft
Displacement is limited to the width of the raceway
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
SKFInside Diameter
40mm
Outside Diameter
50mm
Roller Bearing Type
Needle
Race Width
30mm
Bore Type
Parallel
Material
Metal
Static Load Rating
83kN
Cage Material
Reinforced Nylon 66
Number of Rows
1
Roller Material
Carbon Chromium Steel
Dynamic Load Rating
38kN
End Type
Open
Reference Speed
10000rpm
Limiting Speed
11000rpm
Maximum Speed - Grease
7000rpm
Maximum Speed - Oil
10000rpm
Fatigue Limit Load
10.8kN
Страна на произход
Germany
Детайли за продукта
SKF Machine Needle Roller Bearings Series NK
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size.
Needle roller without inner ring
Needle Roller Bearings with flanges in the outer ring and diameters up to and including 17mm are produced with inserted closure rings, are without lubrication and do not have an annular groove
The larger bearings have integral flanges, an annular groove and, depending on size, one or more lubrication holes in the outer ring
Can be used where the shaft is hardened and ground, the bearing runs on the shaft
Displacement is limited to the width of the raceway