SIRIUS 3TK28 6P Safety Relays, 230 V ac, 10 A, 600 V ac
Технически документи
Спецификации
Brand
SiemensCoil Voltage
230 V ac
Contact Voltage Rating
600 V ac
Contact Current Rating
10 A
Range
SIRIUS
Series
3TK28
Normal State Configuration
6NO + 1NC
Terminal Type
Screw
Length
132mm
Width
90mm
Depth
146mm
Minimum Operating Temperature
-25°C
Pole and Throw Configuration
6P
Maximum Operating Temperature
+60°C
Страна на произход
Germany
Детайли за продукта
SIRIUS 3TK28 5 Safety Relays with contactor relay enabling circuits
The SIRIUS 3TK28 5 safety relay combines solid-state safety functionality and two redundant contacting auxiliary contactors. These safety relays/contactors are supplied ready assembled, wired, tested and certified as a single unit. Available with spring-loaded or screw terminals.
Enabling circuits, floating
AC-15/DC-13 switching capacity
Protective separation
Autostart / monitored start
Screw and snap-on installation mounting possible
Long mechanical and electrical endurance
Certified as a complete unit
Fault minimization and cost reduction through factory wiring
Low installation costs
Approvals
TUV, UL, CSA.
Standards
EN 60204-1, EN ISO 12100, EN 954-1, IEC 61508.
Safety Contactor
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
SiemensCoil Voltage
230 V ac
Contact Voltage Rating
600 V ac
Contact Current Rating
10 A
Range
SIRIUS
Series
3TK28
Normal State Configuration
6NO + 1NC
Terminal Type
Screw
Length
132mm
Width
90mm
Depth
146mm
Minimum Operating Temperature
-25°C
Pole and Throw Configuration
6P
Maximum Operating Temperature
+60°C
Страна на произход
Germany
Детайли за продукта
SIRIUS 3TK28 5 Safety Relays with contactor relay enabling circuits
The SIRIUS 3TK28 5 safety relay combines solid-state safety functionality and two redundant contacting auxiliary contactors. These safety relays/contactors are supplied ready assembled, wired, tested and certified as a single unit. Available with spring-loaded or screw terminals.
Enabling circuits, floating
AC-15/DC-13 switching capacity
Protective separation
Autostart / monitored start
Screw and snap-on installation mounting possible
Long mechanical and electrical endurance
Certified as a complete unit
Fault minimization and cost reduction through factory wiring
Low installation costs
Approvals
TUV, UL, CSA.
Standards
EN 60204-1, EN ISO 12100, EN 954-1, IEC 61508.