RS PRO Surface ESD Tester
Технически документи
Спецификации
Brand
RS ProPower Source
Battery
Test Point
Surface
Supply Voltage
9V
Depth
241mm
Height
89mm
Width
305mm
Display Type
Analogue
Complies with EN 61340-5-1
Yes
Страна на произход
United States
Детайли за продукта
Analogue Surface Resistance Test Kit
The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 10 ohms.
Analogue compliance verification surface resistance checker
Automatic test range voltage selection compliance verification required by EN 61340-5-1
Portable operation with 9 Volt battery
LED Illuminates when battery power is low
Supplied with
1 Analogue surface resistance meter, 1x 9V alkaline battery, 2 shielded test leads, 2x 2.27 kilograms electrodes, 1 plastic Carrying Case, 1 certificate of calibration
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 891,98
Всеки (ex VAT)
1
€ 891,98
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
RS ProPower Source
Battery
Test Point
Surface
Supply Voltage
9V
Depth
241mm
Height
89mm
Width
305mm
Display Type
Analogue
Complies with EN 61340-5-1
Yes
Страна на произход
United States
Детайли за продукта
Analogue Surface Resistance Test Kit
The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 10 ohms.
Analogue compliance verification surface resistance checker
Automatic test range voltage selection compliance verification required by EN 61340-5-1
Portable operation with 9 Volt battery
LED Illuminates when battery power is low
Supplied with
1 Analogue surface resistance meter, 1x 9V alkaline battery, 2 shielded test leads, 2x 2.27 kilograms electrodes, 1 plastic Carrying Case, 1 certificate of calibration