RS PRO Horizontal Stainless Steel Float Switch, Float, 300mm Cable, Direct Load, 300V ac Max, 300V dc Max
Технически документи
Спецификации
Brand
RS ProDevice Type
Float
Mounting Type
Horizontal
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
300mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+120°C
Maximum ac Voltage
300V
Maximum dc Voltage
300V
Maximum Current
500 mA
Maximum Pressure
10bar
Distrelec Product Id
30395025
Страна на произход
China
Детайли за продукта
Stainless Steel, Vertical Float Switch – Horizontal Mount
Horizontal mount with right angled stem
SPST output
Internal vessel mounting
Float reversal, rise or fall operate
Top or bottom tank mounting
Silicone sealing washer
Maximum pressure: 10 bar Kg/cm2
Cable: XLPE, AWG22
Contact resistance: 200mΩ
Clearance hole diameter: 10mm
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 92,62
€ 92,62 Всеки (ex VAT)
1
€ 92,62
€ 92,62 Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
RS ProDevice Type
Float
Mounting Type
Horizontal
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
300mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+120°C
Maximum ac Voltage
300V
Maximum dc Voltage
300V
Maximum Current
500 mA
Maximum Pressure
10bar
Distrelec Product Id
30395025
Страна на произход
China
Детайли за продукта
Stainless Steel, Vertical Float Switch – Horizontal Mount
Horizontal mount with right angled stem
SPST output
Internal vessel mounting
Float reversal, rise or fall operate
Top or bottom tank mounting
Silicone sealing washer
Maximum pressure: 10 bar Kg/cm2
Cable: XLPE, AWG22
Contact resistance: 200mΩ
Clearance hole diameter: 10mm
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.