X9C103PZ, Digital Potentiometer 10kΩ 100-Position Linear Serial-3 Wire 8 Pin, PDIP

Номер на артикул на RS: 921-5368Марка: Renesas Electronics№ по каталога на производителя: X9C103PZIMPA: 0
brand-logo

Технически документи

Спецификации

Taper Type

Linear

Number of Pots per Package

1

Memory Type

Non-Volatile

Resistance Value

10kΩ

Number of Positions

100

Control Interface

Serial-3 Wire

Power Supply Type

Single

Maximum Operating Temperature

+70 °C

Pin Count

8

Minimum Operating Temperature

0 °C

Mounting Type

Through Hole

Height

3.3mm

Width

6.35mm

Length

9.56mm

Typical Single Supply Voltage

5 V

Package Type

PDIP

Dimensions

9.56 x 6.35 x 3.3mm

Страна на произход

Thailand

Детайли за продукта

PEL103 Power Energy Logger (Unit Only)

The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.

• 4 Voltage channels + 3 Current channels
• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software

The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.

Supplied with

• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter

Standards

IEC 61010 600 V CAT IV – 1,000 V CAT III

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 6,542

Each (In a Pack of 2) (ex VAT)

X9C103PZ, Digital Potentiometer 10kΩ 100-Position Linear Serial-3 Wire 8 Pin, PDIP
Изберете тип опаковка

€ 6,542

Each (In a Pack of 2) (ex VAT)

X9C103PZ, Digital Potentiometer 10kΩ 100-Position Linear Serial-3 Wire 8 Pin, PDIP
Информацията за складовите наличности временно не е налична.
Изберете тип опаковка

Купете в насипно състояние

количествоЕдинична ценаPer Опаковка
2 - 8€ 6,542€ 13,08
10 - 38€ 5,586€ 11,17
40 - 98€ 5,292€ 10,58
100 - 198€ 4,811€ 9,62
200+€ 4,583€ 9,16

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Технически документи

Спецификации

Taper Type

Linear

Number of Pots per Package

1

Memory Type

Non-Volatile

Resistance Value

10kΩ

Number of Positions

100

Control Interface

Serial-3 Wire

Power Supply Type

Single

Maximum Operating Temperature

+70 °C

Pin Count

8

Minimum Operating Temperature

0 °C

Mounting Type

Through Hole

Height

3.3mm

Width

6.35mm

Length

9.56mm

Typical Single Supply Voltage

5 V

Package Type

PDIP

Dimensions

9.56 x 6.35 x 3.3mm

Страна на произход

Thailand

Детайли за продукта

PEL103 Power Energy Logger (Unit Only)

The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.

• 4 Voltage channels + 3 Current channels
• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software

The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.

Supplied with

• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter

Standards

IEC 61010 600 V CAT IV – 1,000 V CAT III

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more