Phoenix Contact 3210172 PT 2.5-QUATTRO-MT Series Grey, 0.14 → 4mm², Single-Level, Push In Termination

Технически документи
Спецификации
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Series
PT 2.5-QUATTRO-MT
American Wire Gauge
26 → 12AWG
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Voltage Rating
400 V
Current Rating
20A
Model Number
PT 2,5-QUATTRO-MT
Страна на произход
Poland
Детайли за продукта
Knife Disconnect Terminal Blocks MT/TG
Phoenix Contact brings you a great feed-through terminal block with knife disconnect option with PT Push-In technology. The integrated double function shaft located on the one side of the disconnect point and the integrated test contact on the other side provide for comfortable testing.
Features and benefits:
- 50 % less insertion force
- Direct plugging from 0.34 mm²
- Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
- High current carrying capacity: 20A, 400V
- Flexibly applicable with standardized plug-in zone for function elements
- Standard plug-in bridges for all power distribution tasks
Accessories:
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 41,05
€ 4,105 Each (In a Pack of 10) (ex VAT)
10
€ 41,05
€ 4,105 Each (In a Pack of 10) (ex VAT)
10
Технически документи
Спецификации
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Series
PT 2.5-QUATTRO-MT
American Wire Gauge
26 → 12AWG
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Voltage Rating
400 V
Current Rating
20A
Model Number
PT 2,5-QUATTRO-MT
Страна на произход
Poland
Детайли за продукта
Knife Disconnect Terminal Blocks MT/TG
Phoenix Contact brings you a great feed-through terminal block with knife disconnect option with PT Push-In technology. The integrated double function shaft located on the one side of the disconnect point and the integrated test contact on the other side provide for comfortable testing.
Features and benefits:
- 50 % less insertion force
- Direct plugging from 0.34 mm²
- Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
- High current carrying capacity: 20A, 400V
- Flexibly applicable with standardized plug-in zone for function elements
- Standard plug-in bridges for all power distribution tasks
Accessories:
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.