Phoenix Contact PSM-ME Series Signal Conditioner, RS-485 Input, RS-485 Output, 24V ac/dc Supply, ATEX
Технически документи
Спецификации
Brand
Phoenix ContactModule Type
Repeater
Input Signal Type
RS-485
Output Signal Type
RS-485
Supply Voltage
24V ac/dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-40 → +70°C
Series
PSM-ME
Number of Channels
2
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Termination
Screw
Interface
RS485
Standards Met
cRUus Recognized, CSA, EAC
Distrelec Product Id
12579058
Страна на произход
Germany
Детайли за продукта
Phoenix Contact RS485 to RS485 bus repeater
The RS485 to RS485 Bus Repeater from Phoenix Contact is designed for use on virtually all 2-wire RS485 bus systems such as PROFIBUS and MODBUS. The slim, DIN rail mountable repeater device does not need any special cables meaning that networks can be implemented using available cables, making them cost-effective.
Features and Benefits:
• Operates up to 1.5Mbit/s
• Space-saving 22.5 mm slim device
• Allows more than 32 nodes on an RS485 network
• Removes length limitation of branches
• Parallel connections on one side to simplify the wiring of a ’T’ connection
• Integrated surge protection with transient discharge to the DIN rail
• 3-way isolation between all interfaces
Applications:
Used for potential separation and range increase, they allow for two or more connections.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 567,87
Всеки (ex VAT)
1
€ 567,87
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
Phoenix ContactModule Type
Repeater
Input Signal Type
RS-485
Output Signal Type
RS-485
Supply Voltage
24V ac/dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-40 → +70°C
Series
PSM-ME
Number of Channels
2
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Termination
Screw
Interface
RS485
Standards Met
cRUus Recognized, CSA, EAC
Distrelec Product Id
12579058
Страна на произход
Germany
Детайли за продукта
Phoenix Contact RS485 to RS485 bus repeater
The RS485 to RS485 Bus Repeater from Phoenix Contact is designed for use on virtually all 2-wire RS485 bus systems such as PROFIBUS and MODBUS. The slim, DIN rail mountable repeater device does not need any special cables meaning that networks can be implemented using available cables, making them cost-effective.
Features and Benefits:
• Operates up to 1.5Mbit/s
• Space-saving 22.5 mm slim device
• Allows more than 32 nodes on an RS485 network
• Removes length limitation of branches
• Parallel connections on one side to simplify the wiring of a ’T’ connection
• Integrated surge protection with transient discharge to the DIN rail
• 3-way isolation between all interfaces
Applications:
Used for potential separation and range increase, they allow for two or more connections.