Технически документи
Спецификации
Number of Outputs
1
Minimum Operating Temperature
-40 °C
Pin Count
8
Maximum Operating Temperature
+85 °C
Efficiency
92%
Mounting Type
Surface Mount
Maximum Switching Frequency
1 MHz
Output Type
Fixed
Converter Type
Step Down, Step Up
Maximum Input Voltage
5.5 V
Minimum Input Voltage
1.8 V
Height
0.8mm
Maximum Output Current
100mA
Length
3mm
Width
3mm
Maximum Output Voltage
5 V
Package Type
MLP
Batteries
3 x AAA BatteryDimensions
3 x 3 x 0.8mm
Страна на произход
United States
Детайли за продукта
374 series direct control 3//2 solenoid valves
374 series 3/2 NC direct control solenoid valves.
Compact and lightweight for easy installation.
No minimum control pressure.
Available with brass or stainless steel body.
Pluggable connectors.
Additional coil may be ordered separately (24 Vac: 656-3232, 230 Vac: 656-3226, 24 Vdc: 656-3383).
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
3000
P.O.A.
3000
Технически документи
Спецификации
Number of Outputs
1
Minimum Operating Temperature
-40 °C
Pin Count
8
Maximum Operating Temperature
+85 °C
Efficiency
92%
Mounting Type
Surface Mount
Maximum Switching Frequency
1 MHz
Output Type
Fixed
Converter Type
Step Down, Step Up
Maximum Input Voltage
5.5 V
Minimum Input Voltage
1.8 V
Height
0.8mm
Maximum Output Current
100mA
Length
3mm
Width
3mm
Maximum Output Voltage
5 V
Package Type
MLP
Batteries
3 x AAA BatteryDimensions
3 x 3 x 0.8mm
Страна на произход
United States
Детайли за продукта
374 series direct control 3//2 solenoid valves
374 series 3/2 NC direct control solenoid valves.
Compact and lightweight for easy installation.
No minimum control pressure.
Available with brass or stainless steel body.
Pluggable connectors.
Additional coil may be ordered separately (24 Vac: 656-3232, 230 Vac: 656-3226, 24 Vdc: 656-3383).
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.