Технически документи
Спецификации
Brand
MurataOutput Voltage
5V dc
Input Voltage Range
8 → 14 V dc
Power Rating
30W
Input Voltage Nominal
12 V dc
Output Current
6A
Mounting Type
Surface Mount
Isolated
No
Number of Outputs
1
Package
SMD
Width
7.5mm
Length
9mm
Series
MGK
Load Regulation
0.01
Minimum Temperature
-40°C
Efficiency
95%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Детайли за продукта
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPUs, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc(*FRSR) or 8.0 to 14 V dc(*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc(*FRSR) or 0.7 to 5.0 V dc(*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.
Features and Benefits
Programmable output voltage from 0.7-1.8 V dc
Up to 6 Amps of output current
Quick response to load change
Ultra-small surface mount package
9.0 x 7.5 x 5.0 mm
Outstanding thermal derating performance
Overcurrent protection
On/Off control (Positive logic)
Power Good signal
RoHS-6 hazardous substance compliance
High Reliability / Heat Shock Testing
700 cycle (-40 to +125 °C)
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
MurataOutput Voltage
5V dc
Input Voltage Range
8 → 14 V dc
Power Rating
30W
Input Voltage Nominal
12 V dc
Output Current
6A
Mounting Type
Surface Mount
Isolated
No
Number of Outputs
1
Package
SMD
Width
7.5mm
Length
9mm
Series
MGK
Load Regulation
0.01
Minimum Temperature
-40°C
Efficiency
95%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Детайли за продукта
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPUs, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc(*FRSR) or 8.0 to 14 V dc(*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc(*FRSR) or 0.7 to 5.0 V dc(*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.
Features and Benefits
Programmable output voltage from 0.7-1.8 V dc
Up to 6 Amps of output current
Quick response to load change
Ultra-small surface mount package
9.0 x 7.5 x 5.0 mm
Outstanding thermal derating performance
Overcurrent protection
On/Off control (Positive logic)
Power Good signal
RoHS-6 hazardous substance compliance
High Reliability / Heat Shock Testing
700 cycle (-40 to +125 °C)