ifm electronic Threaded Barrel Proximity Sensor, M30, 10 mm Detection, 10 → 36 V dc
Технически документи
Спецификации
Brand
ifm electronicThread Size
M30
Detection Range
10 mm
Body Style
Barrel
Supply Voltage
10 → 36 V dc
Length
81mm
IP Rating
IP67
Mounting Type
Flush
Housing Material
PBT
Maximum dc Voltage
36V
Minimum Operating Temperature
-25°C
Short Circuit Overload Protection
Yes
Maximum Operating Temperature
+80°C
Switching Current
250 mA
Reverse Polarity Protection
Yes
Страна на произход
Germany
Детайли за продукта
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
ifm electronicThread Size
M30
Detection Range
10 mm
Body Style
Barrel
Supply Voltage
10 → 36 V dc
Length
81mm
IP Rating
IP67
Mounting Type
Flush
Housing Material
PBT
Maximum dc Voltage
36V
Minimum Operating Temperature
-25°C
Short Circuit Overload Protection
Yes
Maximum Operating Temperature
+80°C
Switching Current
250 mA
Reverse Polarity Protection
Yes
Страна на произход
Germany
Детайли за продукта
IFM DI Series Speed Monitors
Thread type M30 x 1.5 / overall length 81 mm
Set point adjustable by potentiometer; indication by yellow LED (= sensor suppressed) and green LED (= actual value ≥ set point, output is conductive)
Easy installation, problem-free operation
Simple, robust solution for monitoring minimum rotation speeds, impulses etc.
The compact speed monitor detects pulses without contact (e.g. from the cams of a shaft or a drive unit) and compares them to the preset value. If the rotation speed is in the acceptable range, the output is conductive.