Huco Reducing Bush 251.14, 3mm Shaft Diameter, 5mm Outside Diameter
Технически документи
Спецификации
Brand
HucoShaft Diameter
3mm
Outside Diameter
5mm
Length
4.3mm
Material
Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Страна на произход
United Kingdom
Детайли за продукта
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 4,775
Each (In a Pack of 2) (ex VAT)
2
€ 4,775
Each (In a Pack of 2) (ex VAT)
2
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 2 - 8 | € 4,775 | € 9,55 |
| 10 - 18 | € 4,578 | € 9,16 |
| 20 - 48 | € 4,507 | € 9,01 |
| 50+ | € 4,387 | € 8,78 |
Технически документи
Спецификации
Brand
HucoShaft Diameter
3mm
Outside Diameter
5mm
Length
4.3mm
Material
Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Страна на произход
United Kingdom
Детайли за продукта
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C