Herga Pressure Sensor, 23.35psi Min, 2.86mbar Max, Differential Reading
Технически документи
Спецификации
Brand
HergaPressure Reading Type
Differential
Minimum Pressure Reading
23.35psi
Maximum Pressure Reading
2.86mbar
Media Measured
Air
Supply Voltage
125 V ac
Housing Material
Fibreglass
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Страна на произход
United States
Детайли за продукта
Ultra Low Pressure, Vacuum or Differential Pressure Switch
Products are screw adjustable but are factory fitted with specific pressure rated springs which are not interchangeable. As the contact pressure is dependent on the air pressure, the switch rating will be reduced when used at the minimum operating pressures. The connection terminals on this version exit vertically downwards from the lowest face in relation to the image shown above.
Glass filled polyester housing
Ideal for airflow and fan monitoring
Mounting bracket and screws included
Should be mounted with the diaphragm vertical
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 74,42
Всеки (ex VAT)
1
€ 74,42
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
HergaPressure Reading Type
Differential
Minimum Pressure Reading
23.35psi
Maximum Pressure Reading
2.86mbar
Media Measured
Air
Supply Voltage
125 V ac
Housing Material
Fibreglass
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Страна на произход
United States
Детайли за продукта
Ultra Low Pressure, Vacuum or Differential Pressure Switch
Products are screw adjustable but are factory fitted with specific pressure rated springs which are not interchangeable. As the contact pressure is dependent on the air pressure, the switch rating will be reduced when used at the minimum operating pressures. The connection terminals on this version exit vertically downwards from the lowest face in relation to the image shown above.
Glass filled polyester housing
Ideal for airflow and fan monitoring
Mounting bracket and screws included
Should be mounted with the diaphragm vertical