Технически документи
Спецификации
Brand
ERGNumber of Positions
1
Mounting Type
Through Hole
Contact Configuration
SPST
Actuator Type
Slide
Contact Current Rating
1 A
Maximum Operating Temperature
+85°C
Minimum Operating Temperature
-55°C
Operating Temperature Range
-55 → +85°C
Страна на произход
Taiwan, Province Of China
Детайли за продукта
Jumper Switches
Enabling reliable ON/OFF switching of PCB track signals using a 2.54mm pitch. These switchable jumpers provide an alternative to conventional jumper links by eliminating the need for 'parking pins' on the PCB or exposing bare pins.
Available in single or 16 way breakable versions
Hard gold plated wiper switches with 4 point contact design
Positive location with screwdriver and positive tactile click
Can be used on hand or flow soldered PCBs with minimal wicking (recommended PCB hole dia., single switch 0.8mm, multipole 1.0mm)
2.54mm PCB Connector RS Range
A large variety of connector options, to cover the majority of board-to-board, bussing and programming requirements.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,686
Each (In a Pack of 20) (ex VAT)
20
€ 0,686
Each (In a Pack of 20) (ex VAT)
20
Купете в насипно състояние
количество | Единична цена | Per Опаковка |
---|---|---|
20 - 380 | € 0,686 | € 13,71 |
400 - 1480 | € 0,657 | € 13,14 |
1500 - 5980 | € 0,629 | € 12,59 |
6000 - 11980 | € 0,602 | € 12,04 |
12000+ | € 0,576 | € 11,52 |
Технически документи
Спецификации
Brand
ERGNumber of Positions
1
Mounting Type
Through Hole
Contact Configuration
SPST
Actuator Type
Slide
Contact Current Rating
1 A
Maximum Operating Temperature
+85°C
Minimum Operating Temperature
-55°C
Operating Temperature Range
-55 → +85°C
Страна на произход
Taiwan, Province Of China
Детайли за продукта
Jumper Switches
Enabling reliable ON/OFF switching of PCB track signals using a 2.54mm pitch. These switchable jumpers provide an alternative to conventional jumper links by eliminating the need for 'parking pins' on the PCB or exposing bare pins.
Available in single or 16 way breakable versions
Hard gold plated wiper switches with 4 point contact design
Positive location with screwdriver and positive tactile click
Can be used on hand or flow soldered PCBs with minimal wicking (recommended PCB hole dia., single switch 0.8mm, multipole 1.0mm)
2.54mm PCB Connector RS Range
A large variety of connector options, to cover the majority of board-to-board, bussing and programming requirements.