Bergquist Thermal Interface Pad, 0.152mm Thick, 1.3W/m·K, Thin Film Polyimide, 19.05 x 12.7mm
Технически документи
Спецификации
Brand
BergquistDimensions
19.05 x 12.7mm
Thickness
0.152mm
Length
19.05mm
Width
12.7mm
Thermal Conductivity
1.3W/m·K
Material
Thin Film Polyimide
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+180°C
Hardness
Shore A 90
Material Trade Name
Sil-Pad K10
Operating Temperature Range
-60 → +180 °C
Страна на произход
United States
Детайли за продукта
Bergquist Sil-Pad K-10
Bergquist Sil-Pad K-10 is a high performance insulator, combining special film with a filled silicone rubber. The result is a product with good cut-through properties and excellent thermal performance. Sil-Pad K-10 is designed to replace ceramic insulators such as Beryllium Oxide, Boron Nitride and Alumina. Ceramic insulators are expensive and they break easily. Sil-Pad K-10 eliminates breakage and costs much less than ceramics.
High performance Kapton® based insulator
Tough dielectric carrier against cut-through
Designed to replace ceramic insulators
Flame rating: UL 94 - V0
Thermal impedance: 0.41°C-in2/W (@50 psi)
Colour: beige
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,583
Each (In a Pack of 10) (ex VAT)
10
€ 0,583
Each (In a Pack of 10) (ex VAT)
10
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 10 - 40 | € 0,583 | € 5,83 |
| 50 - 90 | € 0,466 | € 4,66 |
| 100 - 490 | € 0,408 | € 4,08 |
| 500+ | € 0,392 | € 3,92 |
Технически документи
Спецификации
Brand
BergquistDimensions
19.05 x 12.7mm
Thickness
0.152mm
Length
19.05mm
Width
12.7mm
Thermal Conductivity
1.3W/m·K
Material
Thin Film Polyimide
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+180°C
Hardness
Shore A 90
Material Trade Name
Sil-Pad K10
Operating Temperature Range
-60 → +180 °C
Страна на произход
United States
Детайли за продукта
Bergquist Sil-Pad K-10
Bergquist Sil-Pad K-10 is a high performance insulator, combining special film with a filled silicone rubber. The result is a product with good cut-through properties and excellent thermal performance. Sil-Pad K-10 is designed to replace ceramic insulators such as Beryllium Oxide, Boron Nitride and Alumina. Ceramic insulators are expensive and they break easily. Sil-Pad K-10 eliminates breakage and costs much less than ceramics.
High performance Kapton® based insulator
Tough dielectric carrier against cut-through
Designed to replace ceramic insulators
Flame rating: UL 94 - V0
Thermal impedance: 0.41°C-in2/W (@50 psi)
Colour: beige