Arcol 5.6Ω Thick Film Resistor 35W ±5% AP836 5R6 J 100PPM

Номер на артикул на RS: 162-1112Марка: Arcol№ по каталога на производителя: AP836 5R6 J 100PPM

Технически документи

Спецификации

Страна на произход

China

Детайли за продукта

RS232C/RS485 converter

Model without galvanic isolation (RS 777-924)

This converter allows data to be exchanged between the RS232C interface and the
RS485 interfaces commonly used in industry
Transmission speeds of up to 108 kpbs
Transmission distance of up to 1 km with AWG28 (0.14 mm2) cable
Point to point or multiple connections possible (simultaneous monitoring of several devices)
DCE/DTE configurable
Monitor function for monitoring the exchange of data between two devices (2 receivers in one device) only with the standard model
Full duplex transmission on 4 lines
Only data lines are converted
Optional connection via RJ11 connector or terminal block (4 terminals)
On the RS232 side is a 25-way sub-D socket
Power is supplied via the included mains adapter which is fitted with a Euro Plug

Model with galvanic isolation (RS 255-9762)

Isolation voltage 2000 V
Connection via terminal block (4 terminals)

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 4,588

Each (Supplied in a Tray) (ex VAT)

Arcol 5.6Ω Thick Film Resistor 35W ±5% AP836 5R6 J 100PPM

€ 4,588

Each (Supplied in a Tray) (ex VAT)

Arcol 5.6Ω Thick Film Resistor 35W ±5% AP836 5R6 J 100PPM
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Страна на произход

China

Детайли за продукта

RS232C/RS485 converter

Model without galvanic isolation (RS 777-924)

This converter allows data to be exchanged between the RS232C interface and the
RS485 interfaces commonly used in industry
Transmission speeds of up to 108 kpbs
Transmission distance of up to 1 km with AWG28 (0.14 mm2) cable
Point to point or multiple connections possible (simultaneous monitoring of several devices)
DCE/DTE configurable
Monitor function for monitoring the exchange of data between two devices (2 receivers in one device) only with the standard model
Full duplex transmission on 4 lines
Only data lines are converted
Optional connection via RJ11 connector or terminal block (4 terminals)
On the RS232 side is a 25-way sub-D socket
Power is supplied via the included mains adapter which is fitted with a Euro Plug

Model with galvanic isolation (RS 255-9762)

Isolation voltage 2000 V
Connection via terminal block (4 terminals)