Вземете 7 % отстъпка за всички онлайн поръчки след регистрация с RS.

регистрирайте се сега

3M, ST, PC Multimode Fibre Optic Connector 125μm Fibre Size, 0.2dB Insertion Loss

Номер на артикул на RS: 181-7635Марка: 3M№ по каталога на производителя: 6100B HOT MELT CONNECTOR
brand-logo
Преглед на всички в Фиброоптични конектори

Технически документи

Спецификации

Brand

3M

Connector Type

ST

Connector Polish

PC

Single/Multimode

Multimode

Fibre Size

125µm

Insertion Loss

0.2dB

Jacket Diameter

3mm

Colour

Black

Maximum Operating Temperature

+60°C

Minimum Operating Temperature

-40°C

Страна на произход

China

Детайли за продукта

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

3M, ST, PC Multimode Fibre Optic Connector 125μm Fibre Size, 0.2dB Insertion Loss

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

3M, ST, PC Multimode Fibre Optic Connector 125μm Fibre Size, 0.2dB Insertion Loss
Информацията за складовите наличности временно не е налична.

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Технически документи

Спецификации

Brand

3M

Connector Type

ST

Connector Polish

PC

Single/Multimode

Multimode

Fibre Size

125µm

Insertion Loss

0.2dB

Jacket Diameter

3mm

Colour

Black

Maximum Operating Temperature

+60°C

Minimum Operating Temperature

-40°C

Страна на произход

China

Детайли за продукта

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.