Технически документи
Спецификации
Maximum Drain Source Resistance
1 Ohm
Function
Extraction
Configuration
Round
Mounting
Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted
Face Diameter
200mm
Range
Kompaktní NSX, Easy Pact CVS
Special Features
Humidistat and Timer
Series
Simply Silent
Depth
131mm
Sheet Size
150000 x 175mm
Brand
XpelairСтрана на произход
United Kingdom
Детайли за продукта
MNS series level control relay
Level control via an on / off sensor.
When powered up the relay remains in the rest position.
The level control function only begins after pressing the pushbutton.
This pushbutton is located on the front of the product, but can also be remotely located between terminals Y1 and A2.
The output relay only closes if the on / off sensor is open.
If the level increases enough to close the switch, the relay will be deactivated after the time-delay TOff.
When the level drops and the probe opens, the relay is re-energised after the time-delay TOn.
The LEDs flash when the product is energised and the cycle has not started (pushbutton not yet pressed).
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Maximum Drain Source Resistance
1 Ohm
Function
Extraction
Configuration
Round
Mounting
Ceiling Mounted, Panel Mounted, Wall Mounted, Window Mounted
Face Diameter
200mm
Range
Kompaktní NSX, Easy Pact CVS
Special Features
Humidistat and Timer
Series
Simply Silent
Depth
131mm
Sheet Size
150000 x 175mm
Brand
XpelairСтрана на произход
United Kingdom
Детайли за продукта
MNS series level control relay
Level control via an on / off sensor.
When powered up the relay remains in the rest position.
The level control function only begins after pressing the pushbutton.
This pushbutton is located on the front of the product, but can also be remotely located between terminals Y1 and A2.
The output relay only closes if the on / off sensor is open.
If the level increases enough to close the switch, the relay will be deactivated after the time-delay TOff.
When the level drops and the probe opens, the relay is re-energised after the time-delay TOn.
The LEDs flash when the product is energised and the cycle has not started (pushbutton not yet pressed).