Технически документи
Спецификации
Circuit Designator
BUS
Logic Family
CML to LVPECL, CMOS, HSTL, LVDS, SSTL, TTL
Number of Terminals
6
Number Of Resistors
5
Minimum Operating Temperature
-55°C
Power Rating per Resistor
0.2W
Case Style
Moulded
Maximum Operating Temperature
+125°C
Power Rating
0.75W
Termination Style
Through Hole
Tolerance
±2%
Depth
2.49mm
Temperature Coefficient
±100ppm/°C
Package/Case
SIP
Height
4.95mm
Resistance
4.7kΩ
Length
14.99mm
Series
CSC
Brand
VishayDimensions
14.99 x 2.49 x 4.95mm
Страна на произход
China
Детайли за продукта
PVL collector valves, 6 to 8 mm diameter
Compact and lightweight distributor system, suitable for high flows.
Connectors with integral trigger
Ø6 mm or Ø8 mm.
Choice of driver or solenoid operators.
15 mm high performance solenoid operators.
For mounting on DIN rail.
Warning
Coils and solenoid valve drivers are available separately. Valves with Ø6 and Ø8 mm openings cannot be used in the same valve unit.
Each unit must include a set of end plates.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
2000
P.O.A.
2000
Технически документи
Спецификации
Circuit Designator
BUS
Logic Family
CML to LVPECL, CMOS, HSTL, LVDS, SSTL, TTL
Number of Terminals
6
Number Of Resistors
5
Minimum Operating Temperature
-55°C
Power Rating per Resistor
0.2W
Case Style
Moulded
Maximum Operating Temperature
+125°C
Power Rating
0.75W
Termination Style
Through Hole
Tolerance
±2%
Depth
2.49mm
Temperature Coefficient
±100ppm/°C
Package/Case
SIP
Height
4.95mm
Resistance
4.7kΩ
Length
14.99mm
Series
CSC
Brand
VishayDimensions
14.99 x 2.49 x 4.95mm
Страна на произход
China
Детайли за продукта
PVL collector valves, 6 to 8 mm diameter
Compact and lightweight distributor system, suitable for high flows.
Connectors with integral trigger
Ø6 mm or Ø8 mm.
Choice of driver or solenoid operators.
15 mm high performance solenoid operators.
For mounting on DIN rail.
Warning
Coils and solenoid valve drivers are available separately. Valves with Ø6 and Ø8 mm openings cannot be used in the same valve unit.
Each unit must include a set of end plates.