St Robotics Pneumatic Parallel Robot Gripper
Технически документи
Спецификации
Brand
St RoboticsGripper Type
Pneumatic
End Effector
Parallel
Number of Fingers
2
Gripping Force
18 → 60N
Stroke
8mm
Страна на произход
United Kingdom
Детайли за продукта
ST Robotics PG17 Pneumatic Gripper for R17
The PG17 pneumatic gripper designed for the R17 robot arm uses linear slides which enable high accuracy and repeatability. The basic option comprises of a pneumatic circuit and one gripper with 4 tapped holes for extra mounts enabling the fitting of customised fingers.
Features and Benefits
• Maximum stroke per finger: 3 mm (6 mm total)
• Gripping force: 18N-60N (0.2 MPa - 0.7 MPa pressure)
• Finger type: 2 tapped through holes per jaw
• Repeatability: +/- 0.01 mm
Product Application Information
Due to the high gripping force, this pneumatic gripper is ideal for use in high payload scenarios. It can also be applied in pick and place routines, working with a track or integration with item manipulation procedures.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
St RoboticsGripper Type
Pneumatic
End Effector
Parallel
Number of Fingers
2
Gripping Force
18 → 60N
Stroke
8mm
Страна на произход
United Kingdom
Детайли за продукта
ST Robotics PG17 Pneumatic Gripper for R17
The PG17 pneumatic gripper designed for the R17 robot arm uses linear slides which enable high accuracy and repeatability. The basic option comprises of a pneumatic circuit and one gripper with 4 tapped holes for extra mounts enabling the fitting of customised fingers.
Features and Benefits
• Maximum stroke per finger: 3 mm (6 mm total)
• Gripping force: 18N-60N (0.2 MPa - 0.7 MPa pressure)
• Finger type: 2 tapped through holes per jaw
• Repeatability: +/- 0.01 mm
Product Application Information
Due to the high gripping force, this pneumatic gripper is ideal for use in high payload scenarios. It can also be applied in pick and place routines, working with a track or integration with item manipulation procedures.