Reliance Brass Thermostatic Mixing Valve, 15mm
Технически документи
Спецификации
Connection
15 mm
Body Material
Brass
Maximum Working Pressure
16 bar
Connection Size
15mm
Maximum Set Temperature
+46°C
Minimum Set Temperature
+38°C
Temperature Setting Range
+38 → +46 °C
Страна на произход
Australia
Детайли за продукта
Ausimix TMV2 & TMV3 Thermostatic Mixing Valves
Dual approval TMV2 and TMV3 for complete flexibility
Rapid failsafe on eiter hot or cold supply failure
Provides stable mixed water temperature
Complies with Part G and NHS MES D08 specification
Flat faced union connections for ease of maintenance
Unique temperature adjustment tool incorporated into the cap
Body and fittings: DZR Brass, Nickel plated
Seals: Viton
Spring: Stainless steel
Strainers: Stainless steel
Washers: Tesnit
Approvals
WRAS, TMV2 and TMV3
Standards
BSEN 1111, BS 7942, NHS MES D08
Basin, Bath & Shower Valves
A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 133,62
Всеки (ex VAT)
1
€ 133,62
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 133,62 |
| 5+ | € 129,62 |
Технически документи
Спецификации
Connection
15 mm
Body Material
Brass
Maximum Working Pressure
16 bar
Connection Size
15mm
Maximum Set Temperature
+46°C
Minimum Set Temperature
+38°C
Temperature Setting Range
+38 → +46 °C
Страна на произход
Australia
Детайли за продукта
Ausimix TMV2 & TMV3 Thermostatic Mixing Valves
Dual approval TMV2 and TMV3 for complete flexibility
Rapid failsafe on eiter hot or cold supply failure
Provides stable mixed water temperature
Complies with Part G and NHS MES D08 specification
Flat faced union connections for ease of maintenance
Unique temperature adjustment tool incorporated into the cap
Body and fittings: DZR Brass, Nickel plated
Seals: Viton
Spring: Stainless steel
Strainers: Stainless steel
Washers: Tesnit
Approvals
WRAS, TMV2 and TMV3
Standards
BSEN 1111, BS 7942, NHS MES D08
Basin, Bath & Shower Valves
A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.