Pilz PSENmag Series Transponder Non-Contact Safety Switch, 24V dc, Plastic Housing, M12
Технически документи
Спецификации
Brand
PilzSupply Voltage
24V dc
Housing Material
Plastic
Connection Type
M12
Actuator Type
Coded
Safety Category
4
Sensor Principle
Transponder
Actuator Included
Yes
Series
PSENmag
Switching Distance
15 mm
IP Rating
IP67
Number of Approach Directions
5
Depth
40mm
Width
40mm
Length
75mm
Safety Category
4
Страна на произход
Switzerland
Детайли за продукта
PSENcode Large Non-Contact Safety Switch, Fully Coded
The PSEN cs2.1p safety switch is fully coded and will only switch with an actuator from the PSEN cs2.1 series. The actuator must be taught and can be taught up to a maximum of 8 times but with only 1 actuator at a time.
Series connection - you can connect more than 10 safety switches in sequence to Cat 4 of EN954-1
The switch reacts to a single actuator but can be taught a new actuator up to 8 times if operational damage occurs
5 directions of actuation
M12 connection, 8-pin
Supplied with
Actuator
Approvals
CE, cULus Listed, TÜV, FCC, IC.
Standards
EN954-1 (Cat 4), EN60204-1, EN60947-5-3
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 202,37
Всеки (ex VAT)
1
€ 202,37
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
PilzSupply Voltage
24V dc
Housing Material
Plastic
Connection Type
M12
Actuator Type
Coded
Safety Category
4
Sensor Principle
Transponder
Actuator Included
Yes
Series
PSENmag
Switching Distance
15 mm
IP Rating
IP67
Number of Approach Directions
5
Depth
40mm
Width
40mm
Length
75mm
Safety Category
4
Страна на произход
Switzerland
Детайли за продукта
PSENcode Large Non-Contact Safety Switch, Fully Coded
The PSEN cs2.1p safety switch is fully coded and will only switch with an actuator from the PSEN cs2.1 series. The actuator must be taught and can be taught up to a maximum of 8 times but with only 1 actuator at a time.
Series connection - you can connect more than 10 safety switches in sequence to Cat 4 of EN954-1
The switch reacts to a single actuator but can be taught a new actuator up to 8 times if operational damage occurs
5 directions of actuation
M12 connection, 8-pin
Supplied with
Actuator
Approvals
CE, cULus Listed, TÜV, FCC, IC.
Standards
EN954-1 (Cat 4), EN60204-1, EN60947-5-3