Megger 1002-224 Calibration Check Box, Test Type Continuity, Insulation, Loop, PFC, RCD With RS Calibration
Технически документи
Спецификации
Brand
MeggerTest Type
Continuity, Insulation, Loop, PFC, RCD
Includes
History Card x 10, Label
Calibrated
RSCAL
Weight
2.2kg
Height
100mm
Length
320mm
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
0°C
Width
280mm
Страна на произход
United Kingdom
Детайли за продукта
Megger MTB7671 Test Box
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations.
Tests the full range of a testers capability.
Does not trip RCD protected circuits.
Tests to regulations BS7671, BS EN61557 & IEE On-Site Guide.
Checks insulation, continuity, loop, PFC & RCD functions.
The test box is protected by a 30 mA RCD to ensure any faulty testers cannot cause an unsafe situation.
Check of any voltage measurement ranges on the instrument.
Colour coded test functions.
Meets the safety requirements of IEC61010.
Dimensions: 320 x 280 x 100mm.
Weight: 2.2kg.
Supplied with
10 history cards and 160 “Instrument tested” labels, manual & Calibration Certificate produced and dated at time of manufacture.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 796,39
Всеки (ex VAT)
Calibration type
RS Calibration
1
€ 796,39
Всеки (ex VAT)
Calibration type
RS Calibration
1
Технически документи
Спецификации
Brand
MeggerTest Type
Continuity, Insulation, Loop, PFC, RCD
Includes
History Card x 10, Label
Calibrated
RSCAL
Weight
2.2kg
Height
100mm
Length
320mm
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
0°C
Width
280mm
Страна на произход
United Kingdom
Детайли за продукта
Megger MTB7671 Test Box
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations.
Tests the full range of a testers capability.
Does not trip RCD protected circuits.
Tests to regulations BS7671, BS EN61557 & IEE On-Site Guide.
Checks insulation, continuity, loop, PFC & RCD functions.
The test box is protected by a 30 mA RCD to ensure any faulty testers cannot cause an unsafe situation.
Check of any voltage measurement ranges on the instrument.
Colour coded test functions.
Meets the safety requirements of IEC61010.
Dimensions: 320 x 280 x 100mm.
Weight: 2.2kg.
Supplied with
10 history cards and 160 “Instrument tested” labels, manual & Calibration Certificate produced and dated at time of manufacture.