Harting, D-Sub Standard Series, Male Crimp D-sub Connector Contact, Gold over Nickel Signal, 28 → 24 AWG
Технически документи
Спецификации
Brand
HartingGender
Male
Wire Size
28 → 24 AWG
Contact Material
Brass
Contact Plating
Gold over Nickel
Termination Method
Crimp
Contact Type
Signal
Maximum Contact Resistance
10mΩ
Series
D-Sub Standard
Current Rating
7.5A
Length
14.48mm
Страна на произход
Germany
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,232
Each (In a Pack of 100) (ex VAT)
Стандарт
100
€ 0,232
Each (In a Pack of 100) (ex VAT)
Стандарт
100
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 100 - 4900 | € 0,232 | € 23,25 |
| 5000 - 9900 | € 0,218 | € 21,82 |
| 10000 - 24900 | € 0,211 | € 21,10 |
| 25000 - 49900 | € 0,206 | € 20,62 |
| 50000+ | € 0,20 | € 20,03 |
Технически документи
Спецификации
Brand
HartingGender
Male
Wire Size
28 → 24 AWG
Contact Material
Brass
Contact Plating
Gold over Nickel
Termination Method
Crimp
Contact Type
Signal
Maximum Contact Resistance
10mΩ
Series
D-Sub Standard
Current Rating
7.5A
Length
14.48mm
Страна на произход
Germany
Детайли за продукта
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807