Bosch Sensortec 3-Axis Surface Mount Sensor, LGA, I2C, SPI, 12-Pin
Технически документи
Спецификации
Brand
Bosch SensortecSensor Type
Accelerometer
Number of Axis
3
Technology
Digital
Mounting Type
Surface Mount
Interface Type
I2C, SPI
Maximum Frequency Response
10MHz
Maximum Operating Supply Voltage
3.6 V
Minimum Operating Supply Voltage
1.2 V
Package Type
LGA
Sensitivity
256LSB/g
Pin Count
12
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Страна на произход
Germany
Детайли за продукта
BMA250E, Digital Triaxial Acceleration Sensor
The BMA250E is a 10-Bit, Digital, Triaxial Acceleration Sensor with intelligent on-chip motion-triggered interrupt controller.
Accelerometer programmable function ranges ±2g/±4g/±8g/±16g
On-Chip FIFO (First In First Out)
Motion-triggered Interrupt-signal generation
Ultra-Low Power
Power modes: Normal, Low-Power1, Low-Power2, Standby, Suspend, Deep-Suspend
Temperature Sensor 8-bit
Tap-sensing, Orientation recognition, Flat detection
Supported digital interfaces are I²C and SPI with operating Voltage from 1.2V to 3.6V
Two Power Supplies for the main power, and separate power for the interface
Small package 12-pin LGA
Accelerometers, Bosch Sensortec
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
5
P.O.A.
5
Технически документи
Спецификации
Brand
Bosch SensortecSensor Type
Accelerometer
Number of Axis
3
Technology
Digital
Mounting Type
Surface Mount
Interface Type
I2C, SPI
Maximum Frequency Response
10MHz
Maximum Operating Supply Voltage
3.6 V
Minimum Operating Supply Voltage
1.2 V
Package Type
LGA
Sensitivity
256LSB/g
Pin Count
12
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Страна на произход
Germany
Детайли за продукта
BMA250E, Digital Triaxial Acceleration Sensor
The BMA250E is a 10-Bit, Digital, Triaxial Acceleration Sensor with intelligent on-chip motion-triggered interrupt controller.
Accelerometer programmable function ranges ±2g/±4g/±8g/±16g
On-Chip FIFO (First In First Out)
Motion-triggered Interrupt-signal generation
Ultra-Low Power
Power modes: Normal, Low-Power1, Low-Power2, Standby, Suspend, Deep-Suspend
Temperature Sensor 8-bit
Tap-sensing, Orientation recognition, Flat detection
Supported digital interfaces are I²C and SPI with operating Voltage from 1.2V to 3.6V
Two Power Supplies for the main power, and separate power for the interface
Small package 12-pin LGA