Технически документи
Спецификации
Electrolyte Type
Solid
Polarised
Polar
Tolerance Minus
-20%
Minimum Operating Temperature
-55°C
Lead Diameter
0.5mm
Tolerance Plus
+20%
Terminal Type
Radial
Dielectric Material Family
Tantalum
Surge Voltage
65 V @ +85 °C
Maximum Operating Temperature
+125°C
Mounting Type
Through Hole
Lead Pitch
5mm
Diameter
9mm
Tolerance
±20%
Voltage
20V dc
Dissipation Factor
10%
Brand
AVXEquivalent Series Resistance
0.6Ω
Capacitance
100µF
Leakage Current
16 μA
Series
TAP
Dimensions
9 (Dia.)mm
Детайли за продукта
RS Multipower LED Driver MP 80 Slim HV Series
The MP 80 Slim HV is a direct current electronic driver, multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 80 Slim HV is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.
Driver for built-in use
Multi-power driver with dip-switch
It can be used for lighting equipment in protection class I and II
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads
Approvals
EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
100
P.O.A.
100
Технически документи
Спецификации
Electrolyte Type
Solid
Polarised
Polar
Tolerance Minus
-20%
Minimum Operating Temperature
-55°C
Lead Diameter
0.5mm
Tolerance Plus
+20%
Terminal Type
Radial
Dielectric Material Family
Tantalum
Surge Voltage
65 V @ +85 °C
Maximum Operating Temperature
+125°C
Mounting Type
Through Hole
Lead Pitch
5mm
Diameter
9mm
Tolerance
±20%
Voltage
20V dc
Dissipation Factor
10%
Brand
AVXEquivalent Series Resistance
0.6Ω
Capacitance
100µF
Leakage Current
16 μA
Series
TAP
Dimensions
9 (Dia.)mm
Детайли за продукта
RS Multipower LED Driver MP 80 Slim HV Series
The MP 80 Slim HV is a direct current electronic driver, multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 80 Slim HV is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.
Driver for built-in use
Multi-power driver with dip-switch
It can be used for lighting equipment in protection class I and II
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads
Approvals
EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384