KYOCERA AVX 10μF MLCC, 6.3V dc V, ±10% , SMD
Технически документи
Спецификации
PRICED TO CLEAR
Yes
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Length
2.01mm
Terminal Type
Surface Mount
Depth
1.25mm
Dielectric
X7R
Mounting Type
Surface Mount
Tolerance
±10%
Height
1.52mm
Voltage
6.3V dc
Brand
AVXCapacitance
10µF
Dimensions
2.01 x 1.25 x 1.52mm
Package/Case
0805 (2012M)
Series
Standard
Детайли за продукта
Cerebot MX4cK Development Board
The Cerebot MX4cK is a microcontroller development board based on the Microchip PIC32MX460F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent’s line of Pmod™ peripheral modules, and is suitable for use with the Microchip MPLAB IDE tools. The Cerebot MX4cK is also compatible for use with the chipKIT™ MPIDE development environment. ChipKIT and MPIDE is a PIC32 based system compatible with many existing Arduino™ code examples reference materials and other resources.
The Cerebot MX4cK is designed to be easy to use and suitable for use by anyone from beginners to advanced users for experimenting with embedded control systems, mechatronics and robots. A built in programming/debugging circuit compatible with the Microchip MPLAB IDE is provided on the board, so no additional hardware is required for use with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE.
PIC32MX460F512L 32-bit MIPS-core microcontroller, 512KB Flash memory, 32KB SRAM
USB 2.0 compliant full-speed On-The-Go (OTG) controller with dedicated DMA channel
2 x SPI serial interfaces
2 x UART serial interfaces
2 x I2C serial interfaces
5 x 16-bit timer/counters
5 x timer capture inputs
5 x compare/PWM outputs
16 x 10-bit analogue inputs
2 x analogue comparators
9 x 12-pin Pmod headers
8 x standard R/C servo headers
USB Debug port for program/debug with MPLAB
USB Serial port for use with MPIDE for program/communication OR with MPLAB for simple communication
USB 2.0 On-The-Go (OTG)/Device port
USB 2.0 Host port
Powered from USB or mains power adapter
Diligent Development Tools
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
Стандарт
10
P.O.A.
Стандарт
10
Технически документи
Спецификации
PRICED TO CLEAR
Yes
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Length
2.01mm
Terminal Type
Surface Mount
Depth
1.25mm
Dielectric
X7R
Mounting Type
Surface Mount
Tolerance
±10%
Height
1.52mm
Voltage
6.3V dc
Brand
AVXCapacitance
10µF
Dimensions
2.01 x 1.25 x 1.52mm
Package/Case
0805 (2012M)
Series
Standard
Детайли за продукта
Cerebot MX4cK Development Board
The Cerebot MX4cK is a microcontroller development board based on the Microchip PIC32MX460F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent’s line of Pmod™ peripheral modules, and is suitable for use with the Microchip MPLAB IDE tools. The Cerebot MX4cK is also compatible for use with the chipKIT™ MPIDE development environment. ChipKIT and MPIDE is a PIC32 based system compatible with many existing Arduino™ code examples reference materials and other resources.
The Cerebot MX4cK is designed to be easy to use and suitable for use by anyone from beginners to advanced users for experimenting with embedded control systems, mechatronics and robots. A built in programming/debugging circuit compatible with the Microchip MPLAB IDE is provided on the board, so no additional hardware is required for use with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE.
PIC32MX460F512L 32-bit MIPS-core microcontroller, 512KB Flash memory, 32KB SRAM
USB 2.0 compliant full-speed On-The-Go (OTG) controller with dedicated DMA channel
2 x SPI serial interfaces
2 x UART serial interfaces
2 x I2C serial interfaces
5 x 16-bit timer/counters
5 x timer capture inputs
5 x compare/PWM outputs
16 x 10-bit analogue inputs
2 x analogue comparators
9 x 12-pin Pmod headers
8 x standard R/C servo headers
USB Debug port for program/debug with MPLAB
USB Serial port for use with MPIDE for program/communication OR with MPLAB for simple communication
USB 2.0 On-The-Go (OTG)/Device port
USB 2.0 Host port
Powered from USB or mains power adapter