4D Systems, 4DPI-35 MK2 Primary with 3.5in Resistive Touch Screen
Технически документи
Спецификации
Brand
4D SystemsDiagonal Display Size
3.5in
Display Technology
Resistive Touch Screen
Kit Name
4DPI-35 MK2 Primary
Страна на произход
Australia
Детайли за продукта
Primary Touch Screens for Raspberry Pi 3, Pi 2, A+ and B+, 4D Systems
Add a primary touch screen to your Raspberry Pi quickly and easily with a display from 4D Systems. Available in two sizes: 3.2 inch (RS 909-4105) and 3.5 inch (RS 909-4108), both of which attach via the 40 way header. Power for the screen is supplied from the Raspberry Pi so there is no need for an additional power supply. Installation and set up with your Raspberry Pi can be completed in just a few minutes using the software download available from the 4D Systems website.
- 4 wire resistive touch screen
- 4 corner plates with 2.6mm holes for wall mounting
- Typical frame rate of 17FPS
- High speed 48MHz SPI connection with the Raspberry Pi with compression technology
- On/Off or PWM controlled LED backlight
- Optional bezels are available for the 3.2 inch screen for that professional finish
4D Systems Display Accessories
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 74,52
Всеки (ex VAT)
1
€ 74,52
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 74,52 |
| 5 - 9 | € 73,65 |
| 10+ | € 73,11 |
Технически документи
Спецификации
Brand
4D SystemsDiagonal Display Size
3.5in
Display Technology
Resistive Touch Screen
Kit Name
4DPI-35 MK2 Primary
Страна на произход
Australia
Детайли за продукта
Primary Touch Screens for Raspberry Pi 3, Pi 2, A+ and B+, 4D Systems
Add a primary touch screen to your Raspberry Pi quickly and easily with a display from 4D Systems. Available in two sizes: 3.2 inch (RS 909-4105) and 3.5 inch (RS 909-4108), both of which attach via the 40 way header. Power for the screen is supplied from the Raspberry Pi so there is no need for an additional power supply. Installation and set up with your Raspberry Pi can be completed in just a few minutes using the software download available from the 4D Systems website.
- 4 wire resistive touch screen
- 4 corner plates with 2.6mm holes for wall mounting
- Typical frame rate of 17FPS
- High speed 48MHz SPI connection with the Raspberry Pi with compression technology
- On/Off or PWM controlled LED backlight
- Optional bezels are available for the 3.2 inch screen for that professional finish
4D Systems Display Accessories